Tempo Water Stills have been scientifically designed to ensure economy in operation and beyond occasional cleaning they do not require any special attention. The construction of the Unit is in stainless steel, externally finished in grey Stoved synthetic enamel paint. A triple vapour baffle is provided to avoid splashing of water into delivery tube. The lid is automatically sealed by water forming in a recess in the head of the Still into which the flange

of the lid rests.This minimises the loss of steam. The water supplied to the Still through the constant level arrangement also serves to condense the steam in the condenser, thus the water is warmed up even before it reaches the container where it is converfed into steam. The condenser tube can be dismantled without difficulty by removing the wing nuts which hold the condenser and jacket together. The evaporating vessel is exposed by removing the lid. The Still is fitted with immersion type elements which are capable of displacing the connectors if the still runs dry. However, to ensure long service, special care should be exercised to avoid the Still running dry as the protective arrangement cannot be expected to last normally beyond three operations. In case of burn-out of the heating element, it can be easily replaced. The output of the still is approximate as it is bound to vary according to the voltage of the mains.

The Still is provided with a bracket (to be fixed on the wall) on which the still can rest.

   Salient Features :

	For Pyrogen-free distilled water
	Scientifically desined to ensure economy in operation
	Complete unit made in stainless steel
	Triple vapour baffle to avoid splashing of water into delivery tube.
	Constant level arrangement for inlet water
	Automatic displacement of heater connections should the still run dry
	Provided with M.S. Bracket for wall mounting