Specification

• Light weight Sandwich panel. Double walled construction with backside triple wall.

• 3” Thick PUF Insulation ensures stable temperature with humidity & reduced energy consumption.

• Motorized Blower at back side of the chamber for recirculation of air to develops unique air flow system which ensures maximum uniform temperature & humidity condition inside the chamber.Unique air flow assures quick recovery after door openings.

• Single Phase, TEFC , F-class insulation,1440 RPM, 230 Volts

• High quality S.S. Tubular Heaters are used for better heating.

• Steam injection system & reservoir tank with water level arrangement with indicator.

• Temperature Control
• Temperature Control : By means of Imported Microprocessor based auto tuned PID controller with CE mark & dual display of set value & process value with PT100 sensor
• Humidity Control
  • Humidity Control & Sensing : By means of Imported Microprocessor based auto tuned PID controller with CE mark & dual display of set value & process value with direct % RH.Direct RH electronic capacitor type humidity sensor, avoid wick cup & water.
• Safety Features
  • Additional Safety Digital controller to cut of dry heater & wet heater supply in case temperature of overshoot.
  • Float switch to cutoff the wet heater supply in case of low water level. Audio & Visual alarm.
  • Compressor ON delay timer (2 min.) to safe guard the compressor.
  • In built over load protector provided for hermetically sealed compressor.

• Refrigeration System
  • Refrigeration by means of CFC Free hermitically sealed Emerson Copland make compressor with R 134A for better cooling with ECO friendly refrigerant with time delay to safe guard compressor system.

• 50 mm validation port hole with silicon rubber seal to insert sensors for validation.

• Full view observation Acrylic door with gasket to observe sample inside the chamber.

• Interior illumination for Working area

• Specially designed stainless steel rod trays ensure uniform temperature distribution.

 

Models (S) or (G)	Capacity		Internal size H x W x D cm	External Size H x W x D cm	Tray	Tray size cm
	Cuft.	Liters
TI–710 WIC	190	5400	200 x 136 x 200	212 x 148 x 212	24	90 x 35
TI–711 WIC	230	6400	240 x 136 x 200	252 x 148 x 212	32	90 x 35
TI–712 WIC	280	8000	200 x 200 x 200	212 x 212 x 212	24	90 x 60
TI–713 WIC	340	9600	240 x 200 x 200	252 x 212 x 212	32	90 x 60
TI–714 WIC	530	15000	240 x 250 x 250	252 x 262 x 262	48	72 x 80
TI–715 WIC	640	18000	240 x 250 x 300	252 x 262 x 312	48	90 x 80

OPTIONAL FEATURES

• PLC for auto change over for standby refrigeration system with HMI
  
• CFR 21 part 11 compliance software for PLC with RS 485 or Ethernet communication
  
• Stand by refrigeration and humidity system
  
• Data Logger
  
• CFR 21 part 11 compliance software for data logger
  
• Data scanner complete with sensor
  
• SMS Mobile alert system
  
• Door access security system
  
• Safety digital temperature controller
  
• Timer